LEAD: "Flowers", "Mushrooms" and "Pancakes".......ummmmm ummm!

If you've ever wondered how air gun projectiles perform when they hit objects, then wonder no longer!  These "objects" range from flesh to steel to fruit to water filled bottles/jugs to ballistic gel on down to rubber mulch and plumbers putty.



While many an air gun lacks the all out foot pounds of energy (FPE) compared a powder burner, the one thing that they do have is that just about all the projectiles made for an air gun is either PURE LEAD or a 20-1 mix (Lead to Tin).  Bullets and Pellets.  What does this mean you ask?  Well, pure lead is very soft and malleable and can often be scratched, dented, smashed, mushroomed, flattened, or even reshaped with just your fingers.  Airgun projectiles can be made from a variety of soft metals but anything other than pure lead will create a performance void when compared to pure lead.  Antimony, Tin, Bismuth or any other type of metal simply will not perform like lead will.  Especially at many air gun speeds/power levels.  Lead is one of our planets most plentiful elements and is normally only dangerous when ingested, inhaled or SHOT WITH....lol!  It is by far one of the best and cheapest metals for our sport.

So if lead is this soft, imagine what happens to lead when its pushed 600+- MPH and its hits an object that's soft or solid?  And this is the premise of this post...........

Let's take a look:

A MUSHROOMED .25 cal Predator Polymag pulled from ballistics gel at 10 yards (930 fps).

A MUSHROOMED 7mm 20-1 HP bullet after impacting 2 jugs at 110 yards away. 880+ fps.

  

 

MUSHROOMED Predator PolyMag in 20 caliber after impacting ballistics gel at 10 yards.  880 fps



 

PANCAKED.454 cal/220 gr bullets after impacting AR500 steel at 75 yards!  660 fps.



PANCAKED .308 20-1 bullets after impacting my AR500 steel swinger set at 100 yrds.  880 fps.













 

MUSHROOMED .457 310 gr HPs recovered from Plumbers putty set at 50 yards.  800+ FPS.

 

MUSHROOMED .257 cal HP shot into Ballistics gel.  900 FPS.

 

A FLOWERED trio of .251 slugs after hitting a electricians junction box from 100 yards away.



 

A MUSHROOMED .22 cal Predator PolyMag recovered from Ballistics Gel at 880 FPS!





MUSHROOMED .308 148.5 gr HPs after impacting Duct Seal from 55 yards away!



 

 

FLOWERED 7mm cast bullets after hitting my AR500 plate placed at 200 yards downrange!

 

MUSHROOMED 220 gr .454 cal Raptor bullet after impacting a pigs skull at 40 yards.  660 FPS!



 

A lastly, this is the aftermath of the OBJECT that these projectiles (above) hit:



 

Corsair 308 vs Jack Haley 457.  Jugs set at 91 yards.  Both guns using HP projectiles.

 

Pool ball hit by Corsair 308.  Set out at 55 yards.



 





So as one can clearly see, for air guns, pure lead is one awesome performer and helps the projectile tremendously in transferring its Foot Pounds of Energy on target.  With current bullet casting molds and practices and current pellet making techniques, projectiles and air guns are getting more and more accurate (when combined) and sophisticated (polymer tipped, tin and HP projectiles).

 

DISCLAIMER:  ALWAYS WASH YOUR HANDS WITH SOAP AND WATER AFTER HANDLING LEAD! NEVER PUT YOUR FINGERS IN YOUR MOUTH, EARS AND OR EYES WHILE HANDLING LEAD!

 

For more information on LEAD, please either Google and Wikipedia it.

 

Stay tuned.











 



The TD257 gets a new outfit: MADDOG Airforce Stock

After the long debate with myself, I finally dove into trying to get a MadDog stock for my TD257.  Why you ask?  We will touch on that in a minute.  After contacting Doug Russell who is an absolute pleasure to deal with, he told me that he had been wanting to talk to me anyways and low and behold, I called....  After we got all caught up with one another, we touched on what his stocks can provide and what I needed the stock to do.  Doug told me that he had been wanting to know the dimension of my bigger 53 ci Catalina bottle and that this would be the first step in getting a stock made for my TD257.  You see, the bottle I have is bigger in diameter than the OEM Bottle.  My bottle also has an extension added to it to keep the LOP consistent with the OEM bottle and its for the quick connect and gauge.  So all of this needed to be taken into consideration to build me a MD Stock.  I told Doug that I could get him all the dimensions he needed and that within a couple to a few days, I would have him the numbers and pictures.  Doug would make me a stock simply from the dimension and pictures that I provided to him.  I was anxious to see just how good this guy was......lol!

Overhead view of the 2 bottles:

 

After also taking pictures and measurements, I sent all the pictures and measurements to Doug.  Doug then 2 about 2-3 weeks to carve up the stock and sent me some pics.  During that conversation, he also asked me what all accessories that I wanted mounted/added to the stock and I was like a kid in a candy store.  But I also am a simple kinda guy when it comes to guns and I don't care for the HEAVILY TACTICAL look.  I asked for a weaver rail along with a swivel stud attached so I could mount a bi-pod.  He also asked me if I wanted a fully adjustable mono pod installed in the pistol grip of the stock.  Of course...........I DID!  He also installed a rear swivel stud to the rear of the stock so I could later attach a sling if I deemed it necessary.  Another nice feature he adds to this stocks is a recess grooved into the sides of the stock so when you shoot offhand, your fingers have extra grip in the recess.  His butt pads come in just about any length that you can request up to a couple of inches thick.  This adds in LOP for us longer armed guys.  These stocks are made of POPLAR and are strong and light to boot.

 

Here are some pictures of the stock he came up with via my dimensions.  A prototype if you will:

 



Doug Russell of MADDOG stocks did not disappoint.

So now back to the question of WHY a MadDog Stock if my gun already shoots so well.  Well, Air force air guns are not perfect by any stretch and they are known to have flex at a few points along the action and frame.  My gun has some rigidity bits built into it but it still doesn't remove ALL of the flex. 3 of the key areas are the breech area and the area behind the breech were the bottle attaches (bottle collar) and around the center of the frame.  With the breech and collar area being the worse.  Having a SOLID platform like the MD stock to attach to the action relieves a lot of this "FLEX".  It's like pillar bedding a bolt action rifle if you will.  It makes the Airforce gun LESS hold sensitive and allows you to shoulder and squeeze the stock and NOT the airgun itself.  This feature alone is a God send and will help tremendously.  If you note closely, when i remove the shoulder plate from the rear of the bottle, my original LOP is slightly affected but that's a good thing anyways cause the dimension is well within my COMFORT range.  I've practiced HOLDING the gun with the stock and its feel and dimensions are right on point.  I could not be happier.

 

I can not wait to get the stock mounted and test this puppy out at the range.  Everything is looking very good so far..............................

 

PS........The stock will NOT be this color and finish....lol.  It will be black................

 

PSS......Now that Doug has my bottles dimensions and his stock FITS that bottle, if you purchase a bottle like mine (more shot) then he will already have the master setup and your stock will be ready (fitment trouble free) to make and ship just like the standard stock that fits the OEM AirForce bottle.

 

STAY TUNED!

 

Tofazfou

 



 



SCENERY - A Tale of my HPA Adventures

This video doesn't really need a story behind it.  But I will give a brief overview non the less.

In short, I'm a nature freak.  I love the outdoors.  The grass, the sand, the trees and the animals.  Many times while I'm hunting, I get caught up the sheer beauty of Mother Nature herself.  I take pictures of just about everything I see when i'm adventuring out and I also video everything also.  So this is just a short compilation of my HPA adventures.  These scenes and pictures range from Oklahoma to Texas to California to Alaska.

So sit back and enjoy with your favorite beverage and or Family member.  Its kid friendly too!

Thanks for tuning in and see ya on the next video.

Cedric Sophus
aka Tofazfou

The VIDEO:

Thanx and STAY TUNED!

Tofazfou